Premium Aluminum Case for One Aircraft Transmitter with Die-Cut Foam

This premium aluminum transmitter case is an essential accessory for any RC guy. This case features die-cut foam with a cavity for your heli radio and accessories and has durable aluminum panels with a reinforced frame.

Product Features

  • An essential accessory for any RC guy
  • Great for Spektrum DX7/DX8 transmitters
  • Features die-cut foam with a cavity for your heli radio and accessories
  • Durable aluminum frame with ABS panels and reinforced corners
  • Note: This case will not work with the Spektrum DX6i

DJI RC Aircraft Multi-rotor Helicopter Quadcopter DIY FPV 5.8GHz 8CH 2000mW 2W Wireless AV Video Transmitter Sender + RC805 Receiver with 2dBi Omnidirectional Antennas Set

This DJI RC Aircraft Multi-rotor Helicopter Quadcopter DIY FPV 5.8GHz 8CH 2000mW 2W Wireless AV Video Transmitter Sender + RC805 Receiver with 2dBi Omnidirectional Antennas Set is great for long distance aerial photography. The receiver includes an additional AV output for video recording while using FPV goggles. Requiring certain tech skill, this system is recommended for experts.

Product Features

  • 5.8Ghz video / audio synchronous transmitting / receiving (compatible with PAL and NTSC)
  • 8 working channels. DIP switch
  • 2000mW transmitting power
  • Working voltage (V): Receiver – DC 9-12 (3S LiPo) / Transmitter – DC 7.4-13; Working current (mA): Receiver – 1500 / Transmitter – 1500; Dimensions (mm): Receiver – 100(L) x 70(W) x 18(H) / Transmitter – 69(L) x 31(W) x 26(H); Weight (g): Receiver – 52 / Transmitter – 68.5 (including antenna)
  • Package included: Transmitter with Antenna x 1; Receiver with Antenna x 1; Cables (NOTE: Please tighten antenna before connecting power and DO NOT remove Tx antenna, otherwise, the system may burn)

Reblogged 3 years ago from

WLtoys V977 Brushless RC Heli With RealFlight G7 Simulator Transmitter

Description: Rotor Diameter: 245 mm Body Length: 270 mm Height: 77mm Weight 48.5g Battery: 3.7V 450mAh 25C Flight time: About 6-7 minutes Main Motor: Brushless 1106 Tail Motor: Brushed 0715 Size of Original Package: 40.6*30.2*15.2 cmRealFlight G7 installation conditions: 1. Installation Please note the following: 1) Many anti-virus software will G7 crack files as Trojan is actually a multi-degree-sensitive, anti-virus software before installing completely out of place. During the installation or boot process, if the risk of such a pop-up window reminders, add trust. 2) Check to see if there are other USB devices plugged on your computer, such as cameras, flight joystick, gamepad, etc., may interfere with the installation of the simulator, set after they pull out and re-insert the USB plug simulator. 3) If you have installed on your computer, such as joysticks and the like have PPJOY similar software, be sure to delete before installing the G7. 4) non-XP operating system, please select in XP compatibility mode to run the simulator program. 5) kinds of “GHOST Edition,” “Computer City installed version” and other non-formal version of the operating system, easily lead to a variety of unforeseen errors, it is recommended to install the operating system on the regular edition. 2. Use the minimum computer configuration is as follows: [Operating System]: Windows2000 / XP / ME / 98 / WIN7-32 bit / WIN7-64 bit, desktop or laptop support. [Hardware Requirements]: Intel pentsum 600 or more; 32MB GAP-3D graphics acceleration cards; 128MB of RAM; 10GB or more hard disk; 52X CD-ROM: Note: WIN7 system is installed, you must install the Administrator account (Administrator account), the Then you can normally use in the sub-account.Package Includes: 1 x WLtoys V977 Brushless RC Helicopter 1 x RealFlight G7 Simulator Transmitter 1 x Main Blade 1 x Tail Blade 1 x Charger 1 x Battery 1 x Manual

Product Features

  • Features: 1. Flybarless CP helicopter, aerodynamically designed to achieve unparalleled stability 2. Battery 1S 3.7V 450mAh 25C 3. Brushless outrunner (1106) motor 4. Transmitter has 3D aka Idle-Up switch, Throttle Hold switch, large LCD, low voltage warning. Hovering midpoint setting allows setting of the hovering point. 5. Transmitter supports switching between 3-axis & 6-axis gyro modes
  • 6. 3D Mode activates 3-axis gyro, enables aerobatics such as flips, rolls inverted flight, funnels and tick-tocks 7. Normal (aka 6G) activates 6-axis gyro, allows stable flight, suitable for beginners 8. USB charger 2 at a time 9. Flying weight: 48.5g; Flight time: 6-7 mins 10. The Transmitter has the function of the simulator flight,for G7 G6.5 Phoenix 5.0 XTR.
  • 11. 3D flight 3 axis gyro, control performance is perfect, can easily make various stunts. 12. 6G use 6 axis gyro, flight performance and stability, easy operation, suitable for beginners to flight.

Reblogged 3 years ago from

Velocity Toys Baja Hedgehog Electric RC Truggy 15 MPH PRO 2.4GHz Radio Transmitter System 1:16 Scale Off Road Ready To Run, 4 Wheel Independent Suspension (Colors May Vary)

Package Includes:

VT Baja Hedgehog RC Truggy

Rechargeable Battery with Charger

Pistol Grip Remote Control

Product Features

  • Manufactured by Velocity Toys! Electric Powered (Rechargeable) Full Function! (Go Forward and Backward, Turn Left and Right) Adjustable Front Wheel Alignment High Performance, Can Reach Speeds of Approximately Up to 15 MPH!
  • 1:16 Scale PRO 2.4GHz Radio Control System for Uninterrupted, Interference-Free Driving! Capable of Driving in Virtually Any Terrain! (Mud, Snow, Rock, Sand, Grass, Tarmac, Etc.) Perfect for Outdoor Use and Off Road Racing!
  • 4 Wheel Independent Suspension with Metal Spring Shocks and Dual Control Arms! Durable Monocoque Type Frame Construction with Sealed Gearbox Black Wheels with Premium, Semi-Pneumatic Off Road Tires Lightweight, Interchangeable Lexan Body Shell with Metal Body Pins
  • Recommended for Ages 14+ Requires 6.4v 500mAh Battery to run (Included) Remote Control requires 2 AA Batteries to run (not included)
  • Length: 10″ Width: 8″ Height: 5″

Reblogged 4 years ago from