SeresRoad CXHOBBY CX-20 Professional 2.4GHz 4CH 6-Axis Auto-pathfinder FPV RC Quadcopter UFO Aircraft Toys with Gopro Camera Mount + GPS + IOC + MX Autopilot System

Please Note:

SereRoad is a registered trademark and the only authorized seller is

TecKlife highly appreciate all customers’ opinions to improve the selling ,also if anything you unsatisfied, pls contact our customer service department for probable best solution.

Before you are familiar with the flight vehicle, please don’t set it fly, read the instruction carefully. Get familiar with all kinds of direction control and keep repeating until you can play it as your wishes.

Product Specifications:

Model: CXHOBBY CX-20

Control distance: about 300m

Flying altitude: about 300m

Flying Time: about 15min

Charging Time: About3hours

Channel: 4 Channels

Remote Type: Radio Control

Remote Control Frequency: 2.4GHz

Aircraft Battery: 1 x Rechargeable 11.1V (30.0WH) 2700mAh Li-Po (included)

Transmitter Battery: 4 x AA (not included)

Suitable Age: 14+

Suitable Situation: Outdoor

Function: Functions: GPS hold system, auto-return, up and down, forward and backward, side-flying, left and right turning, hover. Stable Flying, GPS, Handle Mode, Position Hold Mode, Flight Direction Locked Mode, One Key Go-Home, Go-Home when Out of Control, Helight Hold Mode,Low Voltage Protection.

Net Weight: 591 g/20.85 oz

Size: 295 x 295 x 105 mm/11.61 x 11.61 x 4.13 inch

Color: White as shown in the picture

Package Contents:

1 x RC Quadcopter

1 x Remote Controller

1 x Balance Charger

1 x 11.1V 2700mAH Battery

1 x Camera Support

4 x Aircraft Propellers

1 x Aircraft Support

1 x Pack of Tools

1 x English Manual

1 x Disk

Product Features

  • About 15 minutes of flight time. High intensity led lights, to aid orientation during flight. Equipped with 6-axis gyro, more stable and accurate to control. Attractive and highly integrated design. Left hand throttle.
  • Gopro camera mount(camera not included). Auto-Pathfinder has an external removable camera mount for you to mount light and handy cameras (GoPro for example) or other video shooting electronic equipment. It is very convenient for you to record your flight.
  • Failsafe & auto go home/landing. Auto-Pathfinder also has the failsafe function of the MX autopilot system. This means when the communication between the Mx Controller and the transmitter is disconnected, the outputs of all command sticks from controller will go to the center position. If the GPS signal is good enough, the system will automatically trigger Return To Home and will land safely.
  • Maximum flight speed 10m/s. Intelligent orientation control(IOC). Two flight control modes,including position hold. With the built-in MX autopilot system plus a GPS module, the Auto-Pathfinder has GPS Attitude and Attitude Control Mode. Pilots can switch between the two modes to achieve a particular flight experience. Stable,yet agile performance,easy to fly.
  • Low voltage protection. Auto-Pathfinder also has two levels of low voltage protection, a function of the MX autopilot system. It prevents your multi-rotor from crashing or other harmful consequences caused by low battery voltage. In the first level of protection, the LED indicator blinks and makes a sound of “Bi-Bi-Bi” to warn you. In the second level protection the system will trigger the Auto-Pathfinder to land automatically. SeresRoad® have the USA Trademark protector, you could search SeresRoad on USPTO official website.

Reblogged 5 years ago from

Neewer® RC Aircraft Spare Parts 2 Axis Brushless Gimbal PTZ Camera Mount with Motor and BGC 3.1 2 Axis Controller Board for Gopro Hero 1/2/3 FPV Aerial Photography (White)

With 2 pcs 2208 90KV motors and BGC3.1 brushless gimbals controller, sensor.
Brushless motor direct drive.
With anti-vibration rubber balls, easy to adjust.
With motor protector which can help heat dissipation.
Compatible with Gopro 1/2/3.
White color, the latest design, the best choice for Gopro FPV.
Plastic and aluminum, simple structure and light weight.

Material: Plastic, Aluminum
Color: White
Total Weight: 11.4oz/323g

Package Contents:
1x 2-Axis brushless gimbals (unassembled)
2x 2208 90KV motor
1x BGC3.1 2-Axis brushless gimbals controller with sensor and connecting wires (25cm)
1x Screws and nuts pack
4x Anti-vibration rubber ball

Product Features

  • With 2 pcs 2208 90KV motors and BGC3.1 brushless gimbals controller, sensor;
  • Brushless motor direct drive;
  • With anti-vibration rubber balls, easy to adjust;
  • With motor protector which can help heat dissipation;
  • Compatible with Gopro 1/2/3.

Reblogged 5 years ago from